Viewing History
Current version by Daniel Valencia,
Text:
| SUCESS: Notes on Installing SSD in 2011 Mac Mini |
| hi all, |
| I replaced the HD in my mac mini with a OWC Electra SSD 6G. |
| 1. ''' Accor |
| 1. ''' Accor |
| 2. make sure to remove black plastic cover off of old hard drive before pulling SATA cable out of old HD; otherwise you won't be able to. |
| 3. The OWC video guide is great, but you don't need to pull out the motherboard; there is just enough room to slide the old HD out and the new one in. |
| 4. Installing Lion over the Internet with Int Recovery worked, but I had to change my wireless network from WPA2 security to WPA and disable uPNP; not sure why. Go with most basic/compatibl |
| After Lion downloaded (4 hours), it installed in 4.2 minutes flat. Jaw-dropping speed. |
| thanks all, |
| d |
| ps: mac mini exhaust fan speed of ~1800 rpm is normal under light load. |
| PS: I used both the iFixit guide and the OWC video when I did my upgrade, and I needed both to do it right. Note that OWC suggests removing the motherboard to exchange the hd, but as iFixit points out, this is not necessary to get the HD out or the new one in. |
Status:
open
Edit by Daniel Valencia,
Text:
| SUCESS: Notes on Installing SSD in 2011 Mac Mini |
| hi all, |
| I replaced the HD in my mac mini with a OWC Electra SSD 6G. |
| 1. ''''Fan speed the same after; there is no sensor to worry about.'''' |
| 2. make sure to remove black plastic cover off of old hard drive before pulling SATA cable out of old HD; otherwise you won't be able to. |
| 3. The OWC video guide is great, but you don't need to pull out the motherboard; there is just enough room to slide the old HD out and the new one in. |
| 4. Installing Lion over the Internet with Int Recovery worked, but I had to change my wireless network from WPA2 security to WPA and disable uPNP; not sure why. Go with most basic/compatibl |
| 4. Installing Lion over the Internet with Int Recovery worked, but I had to change my wireless network from WPA2 security to WPA and disable uPNP; not sure why. Go with most basic/compatibl |
| After Lion downloaded (4 hours), it installed in 4.2 minutes flat. Jaw-dropping speed. |
| thanks all, |
| d |
| ps: mac mini exhaust fan speed of ~1800 rpm is normal under light load. |
| PS: I used both the iFixit guide and the OWC video when I did my upgrade, and I needed both to do it right. Note that OWC suggests removing the motherboard to exchange the hd, but as iFixit points out, this is not necessary to get the HD out or the new one in. |
Status:
open
Edit by Daniel Valencia,
Text:
| SUCESS: Notes on Installing SSD in 2011 Mac Mini |
| hi all, |
| I replaced the HD in my mac mini with a OWC Electra SSD 6G. |
| 1. |
| 1. |
| 2. make sure to remove black plastic cover off of old hard drive before pulling SATA cable out of old HD; otherwise you won't be able to. |
| 3. The OWC video guide is great, but you don't need to pull out the motherboard; there is just enough room to slide the old HD out and the new one in. |
| 4. Installing Lion over the Internet with Int Recovery worked, but I had to change my wireless network from WPA2 security to WPA and disable uPNP; not sure why. Go with most basic/compatibl |
| After Lion downloaded (4 hours), it installed in 4.2 minutes flat. Jaw-dropping speed. |
| thanks all, |
| d |
| ps: mac mini exhaust fan speed of ~1800 rpm is normal under light load. |
http://eshop -word from "Daniel, A Sincere OWC Jose" ps: mac mini exhaust fan speed of ~1800 rpm |
http://eshop -word from "Daniel, A Sincere OWC Jose" ps: mac mini exhaust fan speed of ~1800 rpm |
Status:
open
Edit by Daniel Valencia,
Text:
| SUCESS: Notes on Installing SSD in 2011 Mac Mini |
| hi all, |
| I replaced the HD in my mac mini with a OWC Electra SSD 6G. |
| 1. Fan speed the same after; there is no sensor to worry about. |
| 2. make sure to remove black plastic cover off of old hard drive before pulling SATA cable out of old HD; otherwise you won't be able to. |
| 3. The OWC video guide is great, but you don't need to pull out the motherboard; there is just enough room to slide the old HD out and the new one in. |
| 4. Installing Lion over the Internet with Int Recovery worked, but I had to change my wireless network from WPA2 security to WPA and disable uPNP; not sure why. Go with most basic/compatibl |
| After Lion downloaded (4 hours), it installed in 4.2 minutes flat. Jaw-dropping speed. |
| thanks all, |
| d |
| -Video Guide to replacing HDD in 2011 mac mini-: |
| http://eshop.ma |
| -word from OWC regarding no thermal sensors-: |
| "Daniel |
| Any 2.5" drive will work on your Mac mini 2011. There is no specialized thermal sensor to worry about. |
| Sincerely, |
| OWC Jose" |
| ps: mac mini exhaust fan speed of ~1800 rpm is normal under light load. |
Status:
open
Edit by Daniel Valencia,
Text:
| -Video Guide to replacing HDD in 2011 mac mini-: |
http://eshop.m |
http://eshop.m |
| -word from OWC regarding no thermal sensors-: |
| "Daniel |
| Any 2.5" drive will work on your Mac mini 2011. There is no specialized thermal sensor to worry about. |
| Sincerely, |
| OWC Jose" |
| ps: mac mini exhaust fan speed of ~1800 rpm is normal under light load. |
Status:
open
Edit by Daniel Valencia,
Text:
http://eshop -word from OWC regarding no thermal sensors-: |
http://eshop -word from OWC regarding no thermal sensors-: |
| "Daniel |
| Any 2.5" drive will work on your Mac mini 2011. There is no specialized thermal sensor to worry about. |
| Sincerely, |
| OWC Jose" |
| ps: mac mini exhaust fan speed of ~1800 rpm is normal under light load. |
Status:
open
Edit by Daniel Valencia,
Text:
| from OWC: |
| Any 2.5" drive will work on your Mac mini 2011. There is no specialized thermal sensor to worry about. |
| Sincerely, |
| OWC |
| OWC |
| ps: mac mini exhaust fan speed of ~1800 rpm is normal under light load. |
Status:
open
Original post by Daniel Valencia,
Text:
from OWC:
Daniel,
Any 2.5" drive will work on your Mac mini 2011. There is no specialized thermal sensor to worry about.
Sincerely,
OWC Jose
ps: mac mini exhaust fan speed of ~1800 rpm is normal under light load.
Status:
open