Viewing History
Current version by oldturkey03,
Text:
| The three points all have metal connection which need solder!! if you over heat the board its hard but if you roll the solder directly below to the gold point you will return the connection!! you can also slip the lifted pad back in place and solder the two outside points down then solder the middle one last and this will actually hold it down and keep connection as well. |
| if anyone wants a repair service let me know I have an ebay store: |
| email me at ipodtouchrepair |
Status:
open
Original post by chad franklin,
Text:
The three points all have metal connection which need solder!! if you over heat the board its hard but if you roll the solder directly below to the gold point you will return the connection!! you can also slip the lifted pad back in place and solder the two outside points down then solder the middle one last and this will actually hold it down and keep connection as well.
if anyone wants a repair service let me know I have an ebay store:
email me at ipodtouchrepair@yahoo.com
Status:
open