Help

Current version by iRobot,

Title:

No power after screen replacement

Text:

i cant get any power either. did the screen replacement step by step, i was careful with the flex cable got the digitizer connected started putting it back together than plugged it in to my PC and no recognition at all. As far as i can tell the cable is fine no tears or anything. as i started taking it apart and lifted the logic board (still plugged into PC) i got the chime/recognition from my pc started putting it back together again and then no more recognition.

is it possible that somewhere under the logic board the flex cable tore? it shouldn't be the charging port right?

please anyone have an answer?

Device:

iPod Touch 4th Generation

Status:

openclosed
openclosed

Edit by oldturkey03,

Title:

No Title (You should edit this question)power after screen replacement
No Title (You should edit this question)power after screen replacement

Text:

i cant get any power either. did the screen replacement step by step, i was careful with the flex cable got the digitizer connected started putting it back together than plugged it in to my pcPC and no recognition at all. As far as i can tell the cable is fine no tears or anything. as i started taking it apart and lifted the logic board (still plugged into pcPC) i got the chime/recognition from my pc started putting it back together again and then no more recognition.
i cant get any power either. did the screen replacement step by step, i was careful with the flex cable got the digitizer connected started putting it back together than plugged it in to my pcPC and no recognition at all. As far as i can tell the cable is fine no tears or anything. as i started taking it apart and lifted the logic board (still plugged into pcPC) i got the chime/recognition from my pc started putting it back together again and then no more recognition.
is it possible that somewhere under the logic board the flex cable tore? it shouldntshouldn't be the charging port right?
is it possible that somewhere under the logic board the flex cable tore? it shouldntshouldn't be the charging port right?
please anyone have an answer?

Device:

iPod Touch 4th Generation

Status:

open

Original post by Israel G,

Title:

No Title (You should edit this question)

Text:

i cant get any power either. did the screen replacement step by step, i was careful with the flex cable got the digitizer connected started putting it back together than plugged it in to my pc and no recognition at all. As far as i can tell the cable is fine no tears or anything. as i started taking it apart and lifted the logic board (still plugged into pc) i got the chime/recognition from my pc started putting it back together again and then no more recognition.

is it possible that somewhere under the logic board the flex cable tore? it shouldnt be the charging port right?

please anyone have an answer?

Device:

iPod Touch 4th Generation

Status:

open